Electrical Conductor Seal Assemblies

Nuclear Containment Seal
Manufactured by: The Sensing Systems Divison
Favorite this Product

Electrical Conductor Seal Assemblies

Nuclear Containment Seal
Manufactured by: The Sensing Systems Division
Favorite this Product

ECSA's are for in-containment applications and can be used where sealing of conductors is required, inside or outside containment.

Get More Info

Description

ELECTRICAL CONDUCTOR SEAL ASSEMBLIES (ECSA)

ECSA's are Class 1E qualified to IEEE-323, IEEE-344, IEEE-383 and IEEE-572 for in-containment applications and can be used where sealing of conductors is required, inside or outside containment. All parts are manufactured to ANSI/ASME NQA-1 and 10 CFR 50 Appendix B. Typical device sealing applications include motor operated valves, limit switches, solenoid valves and pressure transmitters.


NUCLEAR SERVICE CONNECTORS (NSC)

These quick, reliable disconnect/reconnect modules eliminate costly cut and splice procedures. They are made to mate with a variety of hardware including RTD’s, Thermocouples, limit switches, solenoid valves, pressure transmitters, level sensors and other Class 1E devices requiring sealed conductors.

Metal to metal seals eliminate organic O-Rings and gaskets, thus ending seal replacement and maintenance. These assemblies are rated for 40 year service at 225 °F (107 °C) with a radiation resistance to 225 megarads. Our standard design allows for retrofit into existing Class 1E applications and provides direct field termination to MI cable, sensor or instrument housing.

Support

Americas
402 Sonwil Drive
Buffalo, NY 14225

Sales Phone: +1 716.482.7025
Support Phone: +1 716.482.7025

Sales and Support for Electrical Penetrations for the Sensing Systems Division.

Europe | Middle East | Africa
21 rue Christophe Colomb
18110 Fussy, France

Sales Phone: +33 (0)2486 78338
Support Phone: +33 (0)2486 78338

Sales and Support for Electrical Penetrations and Severe Accident Lines for the Sensing Systems Division