Radiagem 4000

Personal Portable Dose Rate and Survey Meter
Manufactured by: The Health Physics Divison
Favorite this Product

Radiagem 4000

Personal Portable Dose Rate and Survey Meter
Manufactured by: The Health Physics Division
Favorite this Product

Radiagem 4000 meter's external smart probes extend the capabilities of the instrument to a range of general surveying applications.

Get More Info Data Sheet

Features

  • Measurement of H*(10) ambient dose equivalent rate from 0.03 mrem/h to 10 rem/h
  • Easy-to-read and backlit analog bargraph and digital display
  • Visual and audible alarms on dose rate and integrated dose equivalent
  • External probes for remote measurements, dose rate and surface contamination
  • Date stamped data-logging (1000 points in probe memory and 1000 points in Radiagem memory)
  • Scaler/timer mode in Data-logging
  • Lightweight, waterproof and easy to decontaminate
  • Rugged and easy-to-use

Description

The Radiagem 4000 meter features excellent ergonomics such as easy handling, large custom LCD display, semi-log bargraph, average digital reading, visual and audible alarms.

Radiagem meter's external smart probes extend the capabilities of the instrument to a range of general surveying applications. In the "smart" design, key components of hardware circuitry (high voltage, amplifier, discriminator, etc.) are located directly inside of the probe housing rather than the host survey instrument. Also, the intelligence associated with controlling those components is located in the probe - that is, control and storage of key parameters, settings, calibrations, probe ID, alarm settings, etc. Thus the probe is a fully integrated subsystem taking and transmitting the measurement to the instrument, which is used for display.

With high voltage and digitization of the data occurring in the probe rather than the instrument, measurement quality is no longer dependent on cable quality as with older analog systems. Also, the probes can be plugged in "hot" without powering down the instrument - the instrument immediately recognizes the probe and automatically switches measurement mode to the mode required for that specific probe.

Calibrations and QA measurements can be performed directly with the probe, without even using the instrument, by connecting the probe to a computer with Radiagem calibration software, allowing your Radiagem meter to remain deployed in the field.

A data-logging button allows the user to store up to 1000 date stamped data points in probe memory for external probes and in the Radiagem meter memory for internal dose-rate detector (see probes' specifications).

A scaler/timer mode can be used for data-logging with 1 to 255 seconds acquisition time. The Radiagem 4000 firmware can be upgraded via PC serial link with the appropriate cable.

The Radiagem 4000 LCD display includes a large choice of units depending on the probe specification: CPM, DPMeq, DPMeq/100 cm2, rem/h and R/h.

A Radiagem meter is also part of the emergency kits that include a variety of contamination probes.

Resources

Brochures
Technological Risks and Nuclear & Radiological Threats (CBRNE)
Software Downloads

01/31/2015

CAUTION

This release IS NOT SUPPORTED by some old Radiagem 2000 / Radiagem 4000.

Please refer to the Release Notes (in zip file) to verify that your Radigem 2000/4000 is eligible for this revision.

Comments:

New version for SABG-30B and SN-D

Support

Americas
5000 Highlands Parkway Suite 150
Smyrna, GA 30082

Sales Phone: 770.432.2744
Support Phone: 770.432.2744

Support and Sales for Health Physics and Radiation Monitoring Systems products in the Americas.

Europe | Middle East | Africa
174 Route d'Eyguières
FR-13113 Lamanon, France

Sales Phone: +33 4 90 59 59 59
Support Phone: +33 4 90 59 60 60

Sales and Service for Health Physics and Radiation Monitoring Systems in Europe, the Middle East and Africa