Beta Contamination Probe
Favorite this Product


Beta Contamination Probe
Favorite this Product

The SB-32 probe for measurement of surface contamination is designed to be used with any CSP™ survey meter or any computer-based system developed within CSP environment. The plastic scintillation detector has a 32 cm2 detection area.

Get More Info Data Sheet


  • Beta surface contamination measurement
  • 32 cm2 Plastic/ZnS Phoswich scintillation detector
  • Calibration via PC software
  • Robust screwed-on grid simple to decontaminate
  • Easy to change scintillator


The SB-32 probe is the ideal tool for direct measurement of beta emitters on glove boxes, small areas and for personal self control, allowing to check worker’s arm in one pass only. Such a well-defined detection area helps to reduce the background noise and improves the Minimal Detectable Activity to better localize contamination spots. The probe body diameter has been reduced to facilitate general handling and reduce the risk of drops.

Entrance grid has been optimized with ideal balance between open area and detector to grid distance to allowing good efficiency and best detector protection. It is hand screwed on the probe body and very easy to remove for decontamination or Aluminium window foil replacement.

Calibration and QA measurements can be performed directly with the probe, without even using any instrument, by connecting the probe to a computer with Canberra Smart Probe Software (CSPS™), allowing your instruments to remain deployed in the field. It can also be connected via CSP-COM modules to integrate third party system and behave as a contamination sensor sub-assembly.

SB-32 probe can be upgraded (probe’s firmware) via CSPS™ software, a USB cable and a PC.


1218 Menlo Drive, Suite A
Atlanta, GA 30318

Sales Phone: 800-243-3955
Support Phone: 800-255-6370

Support and Sales for Detection and Measurement and Radiation Monitoring Systems products in the Americas.

Africa | Asia | Europe | Middle East | Pacific
174 Route d'Eyguières
FR-13113 Lamanon, France

Sales Phone: +33 4 90 59 59 59
Support Phone: +33 4 90 59 60 60

Sales and Service for Detection & Measurement and Radiation Monitoring Systems in Asia, Europe, the Middle East, Africa and Pacific