Logo Basic


DIS Dosimeter Reader

Reading station, access point, and configuration terminal for the DIS series dosimeters.

Tag Features

  • Stand-alone use or interface to WinELD™ Dose Management Software
  • Display of Session and Assignment doses and Session dose reset capability
  • EIA RS-232C serial or optional external 10Base-T Ethernet LAN interface
  • Back-up batteries and internal buffer memory for off-line dose collection
  • Portable table top design
  • PTB approved configuration available


The DBR-2 Dosimeter Reader is designed to read DIS-1™, DIS-1H3™ and EDIS-1™ dosimeters. The dosimeter is simply inserted into the reader head slot for dose read-outs. The design of the slot prevents the dosimeter from being inserted incorrectly.

Just plug the DIS-1, DIS-1H3 or EDIS-1 dosimeter into the Dosimeter Reader and in a couple of seconds the Hp(10), Hp(0.07), Hp(3) or H*(10) doses are shown on the display and stored in a local buffer memory. The instant reading capability allows the user to control his/her dose on a daily basis and makes the monthly or quarterly change of the dosimeter unnecessary.

The control period can be indefinite (in excess of a year), because the dose readings can be transmitted via electronic method rather than physically sending the dosimeter away for reading and recording of official doses.

Related Resources

Do you have a question or need a custom solution? We're here to help guide your research.


Looking for Services or Support?
We're here to help.