Genie™ 2000

Basic Spectroscopy Software
Favorite this Product

Genie™ 2000

Basic Spectroscopy Software
Favorite this Product

Genie 2000 Basic Spectroscopy Software is a comprehensive environment for data acquisition, display and analysis of gamma and alpha spectrometry data.

Get More Info Data Sheet

Features

  • Integrated data acquisition and analysis
  • Independent support for over 250 detector inputs
  • Networking for distributed MCA operation and centralized data management
  • Comprehensive and flexible user programming capability
  • Compatibility with the full Mirion MCA line
  • Wide variety of layered software options available for specialized spectroscopy applications
  • Qualified with Windows 11, Windows 10, Windows 8.1, Windows 7 (64-bit/32-bit)
  • Qualified with Windows Server 2022, 2019, 2016, and 2008 (R1 and R2)
  • Multi-language support: English, French, German, and Russian

Description

Genie 2000 Basic Spectroscopy Software is a comprehensive environment for data acquisition, display and analysis of gamma and alpha spectrometry data. It provides independent support for multiple detectors, extensive networking capabilities, an intuitive and interactive human interface and comprehensive batch procedure capabilities.

The full multitasking architecture of Genie 2000 software allows the software to run multiple independent count procedures for several detectors simultaneously. No procedure is suspended by the activation of another or caused to slow down excessively by software overhead. With Genie 2000 software, operation is fully independent.

The ability to manage multiple detectors independently and simultaneously is further enhanced by the designed-in network support. Genie 2000 applications on multiple computers can cooperate over a network to allow remote access and multiple access to acquisition hardware and other resources. A lab supervisor can examine a live acquisition taking place in the lab under control of another computer – and perform an analysis – without interrupting the procedure in progress.

In Genie 2000 software, acquisition and analysis capabilities are tightly integrated, providing an intuitive human interface and straightforward operation of the various applications. Through windowing screen management, graphical spectral display and analysis results can easily be positioned for quick comparisons.

Two human interface environments are provided with Genie 2000 software. The interactive human interface provides fully interactive operation of all system features. It allows the knowledgeable user access to any system function – usually with no more than two or three mouse clicks.

For dedicated, repetitive operation such as routine sample counting, Genie 2000 software supports a user programming environment for custom development and user interfaces. In this environment, the technician level operator can be guided step-by-step through system operations with a security system limiting access to qualified users as determined by the system administrator.

Resources

Brochures
SyD Brochure
Product Manuals and Guides
Genie and Apex Qualification Matrix
Software Downloads

Details:

Provides support for the DSA-1000 & InSpector 2000 MCAs with Genie 2000 v3.3 on Windows 7 64-bit operating systems. The following are updated:

  • The CIUSB kernel driver updated for Windows 7 64-bit support. The version of this driver is v2.71. 
  • The I2KUSB32.DLL protocol driver updated. 
  • DSA-1000 and InSpector 2000 .drd driver file location updated. 

Note:

This driver is fully qualified with Genie 2000 v3.3 under Windows XP SP3, Windows 7 SP1 32-bit, Windows 7 SP1 and Windows-2008 R2 64-bit operating systems and under English, French, German, and Russian installations.

  • Run a command prompt (cmd) as an administrator. Navigate to the installation media. Execute install.bat. After completion, restart the computer (even if not prompted).

Release Date: 7/15/2017 

This update is for peak fitting when applied to significantly large regions of interest. Specifically, this update will improve the Genie 2000 Sum / Non-Linear LSQ Fit peak area routine for regions of interest that are approximately 12 times or greater the full width at half maximum (FWHM) of a representative peak in the region. This typically occurs only for very complex spectra when a high density of nuclide peaks are generated. 

Please Note: 

Please note: This update is a fully qualified patch for Genie 2000. Updating this patch may affect nuclide results for Genie 2000 and layered applications, for example Apex-Gamma and NDA 2000.

Installation Instructions:

  1. Review the version of Genie 2000 that is installed.  
  2. The zip file contains multiple version update files. Unzip the file and you will find 2 zip files: SPR_J4324940_V321-34_all-languages.zip  and SPR_J4324940_V321-34_all-languages.zip. If using Genie 2000 Version 3.4.1, open the file SPR_J4324940_V341_{Language}.zip for you desired language and then extract the file Panolin.dll to a temporary location. These can be identified by the File Version 3.4.1.3009 and Date Modified value of 13-Jun-2017. 
  3. If using Genie 2000 Version V3.2.1, V3.3, or V3.4, open the file SPR_J4324940_V321-34_{Language}.zip for you desired language and then extract the file Panolin.dll to a temporary location. These can be identified by the Date Modified value of 13-Jun-2017.
  4. Confirm that the Genie 2000 and related applications are not running.
  5. Navigate to the ExeFiles folder of the base Genie installation and rename the file “Panolin.dll” to create a backup.  For example, rename  “C:\Genie2k\ExeFiles\Panolin.dll” to “C:\Genie2k\ExeFiles\Panolin_orig.dll” 
  6. Place the downloaded and extracted file into the same location as above: C:\Genie2k\ExeFiles\
  7. Restart Genie 2000 and/or related applications.
  • See the instructions above

Release Date: 10/30/2013

Details:

Provides the Multiport II USB Genie 2000 driver for support on Windows 7 64-bit Operating Systems and Windows Server 2008 R2. This driver is compatible with Genie 2000 Version 3.3.

Note:

This release of the Multiport II USB driver (Version 1.0.0.3) has been tested with Windows 7 x64 and Windows 2008 R2 using Genie 2000 Version 3.3. For Windows 7 x86 and Windows XP operating Systems, the Multiport II Version 1.0.0.2 USB Driver should be used.

Version 3.3 of the Genie 2000 installation does not copy the Multiport II driver data files when installing on 64-bit operating systems. These files, DrMp2.DRD, MANUAL.DRD and PARALLEL.DRD are provided on the Multiport II driver installation disk and must be copied manually. The location for these files is the "C:\GENIE2K\DRIVERS\"; where "C:" would be replaced by the drive letter of the disk where Genie 2000 was installed. With these files in place you will be able to define Multiport II inputs using the Genie 2000 MCA Input Definition Editor.

Additionally the Genie 2000 installation does not create required registry entries for the Multiport II. The file MP2.reg is provided on the driver installation disk to create the required registry entries. Right click on the MP2.reg file and select the Merge operation to update the registry. Answer affirmatively to messages asking you if you really want to perform this update.

From the Learning Center

Nuclear Measurement Fundamental Principle Articles
Radiation Monitoring Notebook: Practical Answers to Complex Questions
Videos
How to Perform an Energy and Shape Calibration in Genie-2000
How to Install SNAP Protocol Drivers
How to Export Genie-2000 Spectrum Data to Excel
How to Perform a Detector Gain Adjustment in Genie-2000
How to Check the Virtual Data Manager (VDM)
How to Create a New MID File for Use in Genie-2000

Support

800 Research Parkway
Meriden CT, 06450


Worldwide Support and Sales for Spectroscopy and Waste Characterization products