Logo Basic

BM 501™

Mirion Technologies Logo RGB

Boron Meter

Bm501 001
Continuously measuring the boron concentration in water circulating in process of light water nuclear power plants.
Get a Quote
Data Sheet

Tag Features

  • Non-intrusive on-line measurement, directly placed around process pipe
  • Can be adapted to pipe diameter
  • Category B software according to IEC 62138
  • Seismic qualification
  • Temperature compensated measurement
  • Detection sub-assembly featuring a moderator/shield (for neutron thermalization and radiation protection)
  • Standard version with two detectors, temperature sensors and signal processing units for redundancy of measurement (also available with single detector)

Description

The BM 501 boron meter forms part of the proTK™ product line. The BM 501 meter is designed to continuously measure the boron concentration in water circulating in process of light water nuclear power plants. The measurement principle is based on measuring the neutron absorption rate through the B-10 isotope, which depends on the boron concentration contained in the water coolant.

The neutrons are generated by an internal source, which is part of the detection sub-assembly.

Do you have a question or need a custom solution? We're here to help guide your research.

Related Products

Sglm 510 steam generator leakage monitor

SGLM 510™ Steam Generator Leakage Monitor

Safety class (Cat. A) monitoring of the main steam line for leakages in a PWR nuclear power plant with a wide-range gamma ionization chamber.

Safety class (Cat. A) monitoring of the main steam line for leakages in a PWR nuclear power plant with a wide-range gamma ionization chamber.
SG 6566

SG 65/66 NaI Scintillators

The SG 65 and SG 66 scintillators have been developed for safety related monitoring of activity according to KTA 1502. In the scintillator crystal, ionizing radiation generates light pulses, which are converted and amplified into charge pulses by the photo multiplier.

The height of the pulse is proportional to the energy of the gamma radiation. An adjustable pulse amplifier offers calibration of the sensitivity and matching of the output pulses to the impedance of the detector cable.

The SG 65 and SG 66 scintillators have been developed for safety related monitoring of activity according to KTA 1502. In the scintillator crystal, ionizing radiation generates light pulses, which are converted and amplified into charge pulses by the photo multiplier.

The height of the pulse is proportional to the energy of the gamma radiation. An adjustable pulse amplifier offers calibration of the sensitivity and matching of the output pulses to the impedance of the detector cable.
SGLM 504 001

SGLM 504 Steam Generator Leakage Monitor

Used for detecting the gamma radiation from activation or fission products in the secondary loop of pressurized water reactors (PWR), which is an indication of a leakage in the physical barrier between the primary and the secondary loop (e.g. N-16 or radioactive noble gases in the main steam line).

Used for detecting the gamma radiation from activation or fission products in the secondary loop of pressurized water reactors (PWR), which is an indication of a leakage in the physical barrier between the primary and the secondary loop (e.g. N-16 or radioactive noble gases in the main steam line).
KG 5051

KG 50/51 SEC Gamma Ionization Chambers 

High range gamma dose rate monitoring under accident and post accident conditions.

High range gamma dose rate monitoring under accident and post accident conditions.
Support

Looking for Services or Support?
We're here to help.