Logo Basic

WL-23110

Mirion Technologies Logo RGB

Fission Counter

WL 23110

Designed to detect thermal neutrons in the flux range of 6 to 6 x 105 neutrons/(cm2∙ second). The counter is extremely rugged and will operate in any orientation at temperatures up to 570°F (300°C).

Request Info

Description

The WL-23110 fission counter is designed to detect thermal neutrons in the flux range of 6 to 6 x 105 neutrons/(cm2 second). The counter is extremely rugged and will operate in any orientation at temperatures up to 570°F (300°C).

The counter is constructed of materials having good “neutron transparency” and low neutron activation properties. The thermal sensitivity of this counter is approximately 0.18 cps/nv throughout a wide range of applied voltages.

Below is a typical counting response data set for the WL-23110 FC. This data was acquired using Mirion (IST) electronics. The neutron data was obtained with the fission chamber positioned within the Mirion (IST) ACP Neutron Source Box.

Do you have a question or need a custom solution? We're here to help guide your research.

Related Products

WL 24408

WL-24408 Proportional Counter In-line Gas Flow-through

Designed to allow radioactive gas to flow through it during operation (e.g. tritium [a weak β emitter]). The counter is a welded assembly with a stainless steel chamber, centerwire and extension tubes, and employs high purity alumina ceramic insulators. The counter is rugged in construction and may be operated in any orientation at temperatures up to 300°F (150°C).

Designed to allow radioactive gas to flow through it during operation (e.g. tritium [a weak β emitter]). The counter is a welded assembly with a stainless steel chamber, centerwire and extension tubes, and employs high purity alumina ceramic insulators. The counter is rugged in construction and may be operated in any orientation at temperatures up to 300°F (150°C).

WL-24132 Movable In-Core Miniature Fission Chamber

Designed for in-core operation in either BWR's or PWR's. The chamber is constructed from stainless steel with high pur­ity alumina insulation and will operate in any position, at temperatures up to (400°C) 750°F.

Designed for in-core operation in either BWR's or PWR's. The chamber is constructed from stainless steel with high pur­ity alumina insulation and will operate in any position, at temperatures up to (400°C) 750°F.

NY-10846 Fission Chamber

Designed to detect thermal neutrons in the flux range of 10 to 106 neutrons/(cm2∙second). The counter is extremely rugged and will operate in any orientation at temperatures up to 570°F (300° C).

Designed to detect thermal neutrons in the flux range of 10 to 106 neutrons/(cm2∙second). The counter is extremely rugged and will operate in any orientation at temperatures up to 570°F (300° C).
NY 10026

NY-10026 Miniature Fission Chamber

Miniature fission chamber with integral coaxial cable designed for in-core neutron flux mapping with a Teleflex or similar flux mapping system. Minimum thermal neutron sensitivity of 1.0 x 10-17 A/nv and a maximum gamma sensitivity of 3.0 x 10-14 A/(R/hr).

Miniature fission chamber with integral coaxial cable designed for in-core neutron flux mapping with a Teleflex or similar flux mapping system. Minimum thermal neutron sensitivity of 1.0 x 10-17 A/nv and a maximum gamma sensitivity of 3.0 x 10-14 A/(R/hr).
Support

Looking for Services or Support?
We're here to help.